{"product_id":"link-ecu-ts2jz-plug-in-g4x-ecu-toyota-supra-2jz-non-vvti","title":"Link Engine Management G4x Plug In ECU for 93-98 Toyota Supra","description":"\u003ch3\u003eLink G4X TS2JZX Plug-In ECU - 1993-1998 Toyota Supra (A80, 2JZ Non-VVTi)\u003c\/h3\u003e\n\n\u003cp\u003eThe TS2JZX is Link's plug-in engine management for the A80 Supra, and the appeal is that it gives you a modern standalone ECU without the standalone install. It drops straight into the factory ECU location, uses the original mounts, and plugs into the car's existing loom and connectors. No rewiring, no adapter harness, no cutting into the factory wiring. It comes with a startup map so the car runs right away, and because everything stays in the stock location behind the trim, the install looks untouched. You get the full capability of Link's G4X platform on a 2JZ while keeping the car clean and simple.\u003c\/p\u003e\n\n\u003ch4\u003eWhat \"Plug-In\" Actually Means Here\u003c\/h4\u003e\n\n\u003cp\u003eA wire-in standalone means building or adapting a harness, terminating dozens of connections, and getting every pin right before the engine will even turn over. A plug-in skips all of that. The TS2JZX is built specifically for the Supra's factory connector and pinout, so it speaks to the car's existing wiring directly, retains the factory functionality the loom already supports, and is running in an afternoon rather than a weekend of wiring. When a plug-in is available for your car and the factory wiring is still in good shape, it's the easiest path to modern engine management, and this is that path for the 2JZ Supra.\u003c\/p\u003e\n\n\u003ch4\u003eG4X Standard Features\u003c\/h4\u003e\n\n\u003cp\u003eEvery G4X plug-in shares the same processor, firmware, software, and standard feature set as the rest of Link's G4X range, so you aren't getting a stripped-down version to fit the plug-in format:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eDual CAN bus\u003c\/li\u003e\n\u003cli\u003eE-Throttle control (requires a modification before usable on this ECU, see notes below)\u003c\/li\u003e\n\u003cli\u003eFlex fuel\u003c\/li\u003e\n\u003cli\u003eTrigger oscilloscope\u003c\/li\u003e\n\u003cli\u003e3-axis accelerometer\u003c\/li\u003e\n\u003cli\u003eSelectable temp input pullups\u003c\/li\u003e\n\u003cli\u003eFlexible engine protection limiters\u003c\/li\u003e\n\u003cli\u003eCAN keypad control\u003c\/li\u003e\n\u003cli\u003eVVT control\u003c\/li\u003e\n\u003cli\u003eOpen loop boost control\u003c\/li\u003e\n\u003cli\u003eClosed loop boost control\u003c\/li\u003e\n\u003cli\u003eDual closed loop lambda\u003c\/li\u003e\n\u003cli\u003eDirect automatic transmission control\u003c\/li\u003e\n\u003cli\u003eCompatible with all leading aftermarket dashes via CAN or serial stream\u003c\/li\u003e\n\u003cli\u003e512MB of internal data logging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eMotorsport and Advanced Tuning Features\u003c\/h4\u003e\n\n\u003cp\u003eThe TS2JZX carries over the competition features from Link's championship-winning G4X platform, so there's real headroom for a built or track-driven 2JZ:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003eNitrous control\u003c\/li\u003e\n\u003cli\u003eLaunch control\u003c\/li\u003e\n\u003cli\u003eAnti-lag\u003c\/li\u003e\n\u003cli\u003eCruise control\u003c\/li\u003e\n\u003cli\u003eTraction control\u003c\/li\u003e\n\u003cli\u003eRace timer and power management\u003c\/li\u003e\n\u003cli\u003eGear shift control\u003c\/li\u003e\n\u003cli\u003ePaddle shift control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eFitment and Important Notes\u003c\/h4\u003e\n\n\u003cp\u003eRead this part before you buy, because the fitment on the 2JZ is specific:\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine:\u003c\/strong\u003e this ECU is for the A80 Supra with the \u003cstrong\u003e2JZ non-VVTi\u003c\/strong\u003e engine (1993-1997). It is not for the VVT-i 2JZ.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck your connector:\u003c\/strong\u003e confirm your car's connector matches the header shown in the listing photo before purchasing. The plug-in only works with the matching factory header.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmission:\u003c\/strong\u003e it's designed for manual-transmission cars. If yours is an automatic, contact your Link ECU reseller first to discuss Direct Automatic Transmission Control compatibility before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-Throttle:\u003c\/strong\u003e this ECU requires a modification before E-Throttle is usable, so factor that in if your setup relies on electronic throttle.\u003c\/li\u003e\n\u003cli\u003eMost factory features are supported.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAs with any plug-in, it assumes the car's factory wiring is in good condition. On a car whose loom has been hacked up by a previous owner, a plug-in can inherit those problems, so it's worth confirming your wiring is healthy before you count on a clean plug-and-play install.\u003c\/p\u003e","brand":"Link ECU","offers":[{"title":"Default Title","offer_id":68212856095016,"sku":"LNK-211-4000","price":2145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0737\/6604\/3944\/files\/LNK-211-4000_6e3n.jpg?v=1794864645","url":"https:\/\/unit1203.com\/es\/products\/link-ecu-ts2jz-plug-in-g4x-ecu-toyota-supra-2jz-non-vvti","provider":"Unit 1203","version":"1.0","type":"link"}