Skip to content
DC Sports Catback Single Canister Exhaust (18-22 CAMRY)

DC Sports Catback Single Canister Exhaust (18-22 CAMRY)

by DC Sports
SKU SCS4608
Availability:
Only 5 left!
Availability:
Out of stock
Save 55% Save 55%
$774.99
$774.99 - $814.99
$774.99
$348.75
$348.75 - $814.99
$348.75
Discover the unparalleled performance of the DC Sports Single Exit Catback Exhaust System meticulously designed for the 2018-2022 Toyota Camry. Engineered from top-tier brushed T-304 stainless steel, our mandrel-bent 2.5” (63.5 mm) piping guarantees enduring quality and optimal functionality. Stand out on the road with our race-inspired muffler and dual 3.5” tips, delivering a commanding presence and a distinct exhaust note that commands attention. With a seamless bolt-on installation process, our exhaust system effortlessly integrates with your OEM equipment, requiring no modifications and ensuring a hassle-free upgrade. 

Fitment:

  2018 - 2022 Toyota Camry 2.5L Fits SE and SE Nightshade FWD only  

Technical details:


  • 16-gauge T-304 stainless steel, the 2.5" (63.5mm) piping
  • Dual 3.5" tips meticulously designed to perfectly fit SE (4cyl) models, excluding V6 and AWD variants,



Included:


-


Install Guide:


1. Utilizing a flat work area (preferably on concrete), jack up the car and support the car on jack stands under the frame support points. (Refer to your owner’s manual) DO NOT USE THE JACK TO SUPPORT THE CAR WHILE WORKING UNDERNEATH! 

2. Remove the bolts holding the exhaust pipe to the Catalytic Converter pipe and the bolts holding the exhaust pipe to the Muffler pipe. 
3. Using an exhaust hanger removal tool remove the rubber hanger holding the exhaust pipe to the car. 
4. Use the exhaust hanger removal tool to remove the 2 rubber hangers holding the Muffler pipe to the car. 
5. Install DC Sports pipe onto Catalytic Converter pipe. Make sure to use provided gasket. Tighten the bolts. Slide exhaust clamp on the end of the pipe. 
6. Install the second pipe by slipping it into the first pipe. Install rubber hanger from car onto the exhaust hanger. Slide the exhaust clamp onto the end of the pipe. 
7. Install muffler piece onto car by inserting rubber hanger onto car’s hanger and making sure the exhaust pipe slips into the secondary pipe. 8. Make sure exhaust pipes do not rub on anything and exhaust tips line up properly. Tighten down exhaust clamp. 
9. RECHECK ALL YOUR WORK. If exhaust system looks off loosen clamps and adjust. Tighten clamps back down afterward. 
10. Lower the car off the jack stands and start the engine and check for exhaust leaks. 
11. After approximately 500 miles (800km) re-check the exhaust system bolts and nuts and tighten as necessary.  


Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare