Skip to content

RV6 Performance 16-21 Civic 1.5T R365 Black Journal Bearing Turbo

SKU RV6-TRB-01-01
Availability:
Out of stock
Original price $1,249.00 - Original price $1,249.00
Original price
$1,249.00
$1,249.00 - $1,249.00
Current price $1,249.00

The RV6 R365 Black Turbo is a journal bearing turbo with the power curve and boost characteristics of a ball bearing GTX2860 GEN 2, while maintaining the resilience of a journal bearing turbo. Oversized journal and thrust bearings are used to give durability under high loads. An inconel turbo wheel cuts down weight and reduces fatigue from high temperatures. On a test vehicle, the result was 345whp @ 27.5psi on E30 before the MAP sensor and fuel system were maxed out. 

RV6 tested several turbine and compressor wheels and found this setup to be optimal. It can max out the factory fuel system before running into compressor surge/choke, often causing excess vibration and premature failures.

This turbo will require thicker 0W-30 or 5W-30 oil. The reason is that running increased boost pressures on a small frame turbocharger puts significant load on the thrust bearing. The thicker oil will offer better production to the turbo and engine at this boost level.

This is the latest update to the R365 Series Turbo. It features a new compressor and turbine wheel for faster spool and more top end power. 

Note: Professional installation recommended. Custom tuning required.

Features

  • Direct drop in design
  • Optimized housings made from scratch  
  • Oversized journal bearing
  • Oversized thrust bearing for high loads
  • Light weight billet compressor wheel
  • Inconel Alloy Turbine wheel
  • Optimized FEA analysis design

Fitment:

2016‐2021 Honda Civic 1.5T
2017‐2021 Honda Civic Si  

Detailed Fitment:

  • Civic 2016-2020
  • Civic Si 2017-2021

Technical details:


Compressor

Inducer - 50.38mm
Exducer - 68mm
Blades - 5+5

Turbine
Inducer 47mm
Exducer 41.4mm
Blades - 9
A/R 0.5  


Included:


1 x R365 Black Turbocharger  

1 x Inlet Gasket
1 x Outlet Gasket
1 x Oil Feed Adapter  
1 x Preassembled Oil Feed Line with Banjo Adapter
1 x Upper Coolant Banjo Adapter
1 x Lower Coolant Banjo Adapter
2 x M12 Coolant Banjo Bolt
1 x M10 Oil Banjo Bolt (1.0MM)
4 x M12 Copper Washer
2 x M10 Copper Washer
2 x M10 x 1.25 x 30mm Flange bolts  
2 x M10 x 1.25 x 42mm Studs
2 x M10 x 1.25 Flange Nuts
1 x M8 x 1.25 x 48mm Studs
1 x Oil Strainer O-Ring  


Install Guide:


Torque Specs


Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare