Skip to content

Hybrid Racing K-Swap Electronics Package (Universal)

SKU HYB-BUN-01-100
Original price $0.00 - Original price $0.00
Original price $0.00
$1,968.97
$1,968.97 - $1,968.97
Current price $1,968.97
This K-Swap Electronics Package includes all major wiring components needed to get your swapped engine running. Check wiring off the list while saving in the process.

Intended for K-swapping a chassis where no plug & play conversion harness is available, our team put together this bundle that includes all the major wiring components for a trouble-free wiring install. This is suitable for any vehicle with a K20A/A2 engine, ranging from Honda and Acura (such as Preludes, DA Integras, Accords, and older Honda chassis) to full tube chassis race cars.

Intended for K-swapping a chassis where no plug & play conversion harness is available, our team put together this bundle that includes all the major wiring components for a trouble-free wiring install. This is suitable for any vehicle with a K20A/A2 engine, ranging from Honda and Acura (such as Preludes, DA Integras, Accords, and older Honda chassis) to full tube chassis race cars.    

What’s Included? 
  • The Rywire K-Series Budget Tucked Harness Version 2 engine wiring harness connects to your K20A/A2. Use with other engine models is possible but may require changing sensors or sensor connectors. 
  • Hondata K-Pro V4 ECU provides tuning for your engine, and equally as important will overcome the factory immobilizer – a major hurdle for any K-swap. 
  • A fresh Denso Wideband/Primary O2 Sensor is included to rule out any inconsistent data for a faulty sensor - your tuner will thank you later.  
  • Hybrid Racing K-Series Swap Ground Kit will help avoid all kinds of headaches associated with poor grounding such as premature failure of electronics and faulty sensor readings.  
To tie everything together, we supply our own K-Series Swap Conversion Harness, a user-friendly harness that has been used in 1000’s of K-swaps worldwide. This allows the ECU to be connected to the engine harness, wideband o2 sensor, instrument cluster, and chassis wiring. By adding a constant and switched 12V source, the entire system will be powered and ready for action.   

Rywire K-Series Budget Tucked Harness Version 2 

Rywire harnesses are hard to match in terms of quality. They are made with all new materials including OEM quality connectors for a sure-fit. Every pin is pneumatically crimped, meaning if pulled, the wire itself will yield before the crimped connection fails. Harnesses are finished in expandable loom and connectors are labelled for ease of installation. All connections are 100% quality tested pin to pin. 

This particular Rywire V2 Tucked Harness caters to universal engine swaps as it routes more like the OEM K-series harness through the center or more to the right on the firewall. This makes it ideal for Right Hand Drive vehicles; however, it can still be used in LHD chassis applications.  

Hondata K-Pro V4 The K-Pro ECU is a specially modified 2002-2004 Honda ECU that allows connection to your laptop running Windows. The provided K-Pro ECU Manager software allows tuning such as: fuel/ignition trim, VTEC/VTC, adding flex-fuel for E85, monitoring of various inputs, and many other functions.  

Hondata ECU’s maintain factory form but allow you to get much more from your K-series. Provisions are included for outputs such as boost controls, flex-fuel, nitrous control, etc. In addition, data logging is available in the KManager software.   

ECU modifications are available with a send-in core for ECU numbers: PRB (A01-A12 & 305) PND (A01-A09) PNF PRA PRC (JDM DC5 Integra Type R) PRD PPA (A0#, A5#) PPL (A0#, A5#)

Hybrid Racing Universal K-Series Swap Conversion Wiring Harness  

This Conversion Harness is made with connectors, terminals, and wire sourced from the same company that Honda uses for their harnesses. These parts are ordered in bulk from Japan and ensure you will get a brand-new product that will work perfectly with Rywire harness and Hondata ECU.  

Our Race Harness includes a fuel pump relay, a main relay, and a primary oxygen sensor relay. It comes wired with a provision for the included Denso Wideband/Primary o2 Sensor. This harness has outputs including: tachometer, speedometer, low oil pressure warning, malfunction indicator, fan control, fuel pump control, and starter relay.   

Hybrid Racing K-Series Swap Ground Kit 

Ground kits give you some extra slack when running ground wires so you don’t have to fool around with cutting and splicing to get everything connected.  Good ground connections are arguably the most important part of any electrical system. Without them, there's no way for current to flow. Being confident that your wiring is properly grounded is critical when it's time to troubleshoot problems with any fuel injected car. Obviously, this is even more important in the case of an engine swapped vehicle, where any number of electrical issues could arise. 

Denso Wideband/Primary O2 Sensor (K-series)

 A fresh wideband o2 is included to rule out any inconsistent data for a faulty sensor. This sensor plugs in via a connector in the Conversion Wiring Harness and interfaces with Hondata for critical tuning of AFRs. 




Fitment:

Universal K-Series swaps
ECU modifications are available with a send-in core for ECU numbers: PRB (A01-A12 & 305) PND (A01-A09) PNF PRA PRC (JDM DC5 Integra Type R) PRD PPA (A0#, A5#) PPL (A0#, A5#)  


Detailed Fitment:

  • Accord 1990-1993
  • Accord 1994-1997
  • Accord 1998-2002
  • Accord 2003-2007
  • Accord 2008-2012
  • Accord 2013-2017
  • Accord 2018-2022
  • Civic 1988-1991
  • Civic 1992-1995
  • Civic 1996-2000
  • Civic 2001-2005
  • Civic 2006-2011
  • Civic 2012-2015
  • Civic 2016-2020
  • CR-V 1997-2001
  • CR-V 2002-2006
  • CR-V 2007-2011
  • CR-V 2012-2016
  • CR-V 2017-2021
  • CRX 1988-1991
  • Del Sol 1993-1997
  • Fit 2007-2008
  • Fit 2009-2014
  • Fit 2015-2020
  • HR-V 2017-2021
  • Insight 2000-2006
  • Insight 2010-2014
  • Insight 2019-2022
  • Odyssey 1995-1998
  • Odyssey 1999-2004
  • Odyssey 2005-2010
  • Odyssey 2011-2017
  • Odyssey 2018-2021
  • Passport 1994-2002
  • Passport 2019-2021
  • Pilot 2003-2008
  • Pilot 2009-2015
  • Pilot 2016-2021
  • Prelude 1988-1991
  • Prelude 1992-1996
  • Prelude 1997-2001
  • Ridgeline 2006-2014
  • Ridgeline 2017-2021
  • CRZ 2011-2016
  • Type R 2017-2021
  • Civic 2022+
  • S2000 2000-2005
  • S2000 2006-2009
  • Civic Hatchback 1988-1991
  • Crosstour 2012-2015
  • Civic Si 2002-2005
  • Civic Si 2006-2011
  • Civic Si 2012-2015
  • Civic Si 2017-2021
  • Civic Si 2022+
  • Civic 1984-1987
  • Civic SI 1999-2000
  • City 2014-2021
  • Civic Type R FL5
  • CL 1997-1999
  • CL 2001-2003
  • Integra 1986-1989
  • Integra 1990-1993

Technical details:


Works for most K Swaps

Works with K20 and K24 swaps


Included:


(1) Rywire K20A2 Engine Harness

(1) Hybrid Racing Ground Kit
(1) Hybrid Racing Universal Conversion Wiring Harness
(1) Denso O2 Sensor 
(1) Hondata KPro V4 Conversion
  • Customer Must Send in Their Own Compatible ECU


Install Guide:


Universal K-Series Swap Conversion Wiring Harness


Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare