Acura

This genuine Honda K20Z3 Manifold Absolute Pressure Sensor, or MAP Sensor, is what helps the vehicle ECU to determine the air density and, thus, th...

Wiring can be the most daunting part of a project, Blox simplifies the process with their ECU Jumper Harness.  This harness allows an OBD-1 ECU to ...

The Hondata s300 Version 3 is a plug-in module for the OBD1 factory Honda Engine Computer (not included) for manual transmission vehicles that vast...

Why FlashPro should be your first modification?The DE5 FlashPro comes preloaded with a base map that will add 45 hp and 50 lb-ft torque at the clic...

The KTuner V2.0 ECU Flash Tuner is the premium option designed exclusively for your modern Honda/Acura chassis. This advanced tuning kit takes the ...

Upgrade your driving experience with the KTuner V1.2 ECU Flash Tuning – the ultimate solution for unlocking the full potential of your modern-day H...

The Honda B Series Map Sensor is an essential maintenance item for your engine. The OEM B Series Map Sensor provides precise and accurate readings ...

The K20A2 Map Sensor provides precise and accurate readings, enhancing fuel efficiency and engine performance. The quick response time makes rapid ...

The OEM Honda K20A2 Camshaft TDC Sensor determines the position of the camshaft with pinpoint accuracy, eliminating the risk of incorrect timing si...

OE Honda/Acura K20A2 Knock Sensor is specifically designed for the 2002-2004 Acura RSX Type S. It helps to precisely record knocking noise and prot...

The K20A2 crank sensor is a vital component that precisely monitors the position and the rotational speed of the crankshaft. Using OEM quality sens...

The Rywire K to B Series Sensor Adapter allows the use of the factory k series wire harness with a B series throttle position sensor (TPS) or manif...

The Rywire Mil-Spec Coil Plug Retrofit Harness is designed to make changing your B or H series to Coil-On-Plug (COP) that much easier. Compatible w...

The new Rywire B Series OEM Replacement Engine Harness is now available for the EG/DC chassis in LEFT HAND DRIVE orientation. This wire harness is ...

An alternator adapter harness for use with an OBD0 & OBD1 chassis that is using an OBD2 alternator.  Designed to work for a 1988 to 1995 Honda...

The Rywire Honda O2 Sensor Extension allows you to extend the connection on your primary O2 sensor with this  4-wire O2 Male to Female 33-inch ext...

They did the fabrication; all you have to do is weld it in! SpeedFactory CNC laser cut and formed this battery box to be a snug fit for your 16 vol...

A SpeedFactory Racing Billet Battery Tie Down holds your battery down tight and looks good doing it. No one likes the sound of rattling from the en...

This is a high-quality direct factory replacement TPS (Throttle Position Sensor) with included mounting hardware and gasket, and it comes with a 1-...

The use of an OBD-1 (92-95) ECU is needed for proper tuning of your high performance engine. The SpeedFactory OBD-0 to OBD-1 ECU Conversion Harness...

The use of an OBD-1 (92-95) ECU is needed for proper tuning of your high performance engine. The SpeedFactory Racing OBD2-B to OBD-1 Honda/Acura EC...

The use of an OBD-1 (92-95) ECU is needed for proper tuning of your high performance engine. The SpeedFactory Racing OBD2-A to OBD-1 Honda/Acura EC...

The SpeedFactory Racing OBD1 to OBD2A Honda/Acura ECU Conversion Harness allows you to use any OBD2A Honda/Acura M/T ECU in a 92-95 Civic, 92-95 Ac...

A billet aluminum part for your billet aluminum part! This updated version of Blox’s OEM-style throttle position sensor for K-series features a m...

If you are plagued by the typical symptoms of a faulty TPS - surging idle, poor throttle response, excess fuel consumption - don’t worry, it’s co...

If you are plagued by the typical symptoms of a faulty TPS - surging idle, poor throttle response, excessive fuel consumption - don’t worry, it’s c...

Wiring can be the most daunting part of a project, Blox simplifies the process with their ECU Jumper Harness.  This harness allows an OBD-1 ECU to ...

Wiring can be the most daunting part of a project, Blox simplifies the process with their ECU Jumper Harness.This harness allows an OBD-1 ECU to be...

A loose battery can be a hazard whether you’re driving on the track or street. Blox Racing solves this problem while spicing up your engine bay wit...

The Hondata 4 Bar Map Sensor is an aftermarket upgrade designed for use with B-Series Honda and Acura vehicles. It replaces the factory map sensor ...

Why FlashPro should be your first modification.FlashPro is by far the most critical modification you will make to your 2007-2008 Acura TL. Many aft...

Why FlashPro should be your first modification.FlashPro is by far the most critical modification you will make to your 2007-2012 or 2019-2023+ RDX....

Version 2 of the Rywire K-series engine harness was created to facilitate a more universal chassis, and harness routing preference. This style can...

With over ten years of K-Series swap wiring experience, the Hybrid Racing Conversion Harness is the most widely used and reliable K-Swap conversio...

In the past when doing a K-Swap you either had to purchase a Type R ECU or a Hondata Kpro. Now with the release of the new Immobilizer Removal Unit...