RV6 Performance Rear Camber Arms for 16+ Civic/23+ Integra

RV6 Performance Rear Camber Arms - 2016+ Honda Civic / 2023+ Acura Integra

Lowered your Civic or Integra and now the rear camber's too aggressive? The RV6 adjustable rear camber arms give you full control over rear camber angle so you can dial it back to a usable setting or set it exactly where you want it for track work. These arms replace the factory lower B-arms that sit under the rear spring. The factory arms are stamped steel with rubber bushings and they're not adjustable, so once you lower the car you're stuck with whatever camber the new suspension geometry gives you. The RV6 arms use adjustable heim joints at the subframe connection so you can set camber exactly where you need it.

Why You Need Adjustable Camber Arms

When you lower a Civic or Integra with springs or coilovers, the rear wheels gain negative camber as the suspension geometry changes. A little bit of negative camber is good for cornering grip, but too much kills straight-line traction, eats the inside edge of your tires, and makes the car feel unstable. Factory arms have no adjustment, so you can't bring the camber back to a reasonable angle. Adjustable camber arms let you dial the camber back in or set it more aggressive if you're setting the car up for track use.

Heim Joints at Subframe Connection

The RV6 arms use adjustable heim joints at the subframe end. Heim joints don't deflect under load the way rubber bushings do, which means your rear suspension geometry stays consistent when you're loading the suspension mid-corner. You get more predictable handling because the bushings aren't flexing and changing your alignment settings under load.

Comes with Adjustment Wrenches

The kit includes two wrenches for adjusting the arm length. You don't need to source special tools or figure out what size wrenches you need. Everything's in the box so you can make adjustments as needed.

What You Get

• RV6 adjustable rear camber arms (pair, left and right)
• Wrinkle red finish
• Adjustable heim joints at subframe connection
• Replaces factory lower B-arms (under rear spring)
• All mounting hardware for subframe, knuckles, and sway bar end links
• Two adjustment wrenches included

Fits Your Car

• 2016-2021 Honda Civic (10th Gen)
• 2022+ Honda Civic (11th Gen)
• 2023+ Acura Integra

Note: Get an alignment after installing adjustable camber arms. Even if you set them to approximately the same length as the factory arms, you'll need a professional alignment to dial in the exact camber and toe settings. Heim joints require periodic inspection and may need replacement over time depending on use.

Fitment:

Detailed Fitment:

• Integra Base 2023-2024
• Integra Type S DE5
• Civic 2016-2020
• Type R 2017-2021
• Civic Si 2017-2021
• Civic 2022-2026
• Civic Si 2022-2026
• Civic Type R FL5

Included:

Left and Right Camber Arms

Install Guide:

RV6 Performance Rear Toe Arms Install Guide