Action Clutch's Stage 3 (1MS) Clutch Kit is designed to withstand even the most challenging conditions. Featuring a heavy-duty single diaphragm pressure plate, reinforced drive straps, and a Sprung MIBA Ceramic (available in a 4 or 6 puck) disc, this kit provides peak performance and extreme durability for low/mild horsepower vehicles. Our Sprung MIBA Ceramic clutch kit provides quicker engagement and will introduce some clutch chatter, which will minimize after proper break-in. For those looking to take their vehicles to the next level, the Stage 3 (1MS) Action Clutch Kit provides maximum control and power with little compromise on reliability.
At Action Clutch, safety is our top priority. We understand how catastrophic engine or transmission damage can be caused by springs popping out which is why we use our patented, fully enclosed spring retainers to keep your investment protected at all times. Every kit is quality checked by one of our experienced engineers (with over 60 years of collective experience) and signed off as safe before being released as a finished product. This gives you peace of mind knowing that your Action Clutch will perform consistently every time.
170% INCREASED HOLDING CAPACITY OVER FACTORY KIT*
HEAVY-DUTY STREET USE AND OCCASIONAL DRAG / ROAD RACING
Technical details:
Break-in Requirements 500 street miles / Keep RPM’s under 4500, no more than half-throttle, no boost (if applicable). Proper break-in is required in order to retain product warranty, ensure longevity and holding capacity.
Ceramic based clutch discs intend to increase the holding capacity and durability of the clutch as opposed to an increased life expectancy. Using a ceramic based material for easy street driving may contribute to premature wear of the clutch kit due to the harsher engagement and because of the higher tendency to slip the clutch during street driving.*
Increase in holding capacity is rated in Crank Torque, not Wheel Torque
Included:
(1) Sprung MIBA Ceramic 6 Puck Disc
(1) Single Diaphragm HD Pressure Plate
(1) Pilot Bearing / Bushing (when applicable)
(1) Clutch Alignment Tool
(1) Conventional Release Bearing
Action Clutch's Warrenty
ACTION CLUTCH products are manufactured and tested to the highest quality standards. This limited one (1) year warranty offered by ACTION CLUTCH covers defects in material or workmanship in new ACTION CLUTCH products. This warranty extends to the original purchaser only and is nontransferable. Only consumers purchasing ACTION CLUTCH products from authorized ACTION CLUTCH retailers or resellers or through the ACTION CLUTCH website may obtain coverage under our limited warranties.
ACTION CLUTCH warrants this product against defects in material or workmanship as follows:
ACTION CLUTCH will replace at no charge for parts only that proves defective because of improper workmanship. If ACTION CLUTCH is unable to provide a replacement and repair is not practical or cannot be made in a timely fashion, ACTION CLUTCH may elect to refund the purchase price in exchange for the return of the product.
Action Clutch offers a 1 (one) year warranty from the original date of purchase. We also offer a 30-day return policy with a 20% restocking fee.
Our warranty does not cover any problem that is caused by:
(1) Conditions, malfunctions or damage not resulting from defects in material or workmanship. (2) Conditions, malfunctions or damage resulting from (1) normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration. (3) Accessories, connected materials and products, or related products not manufactured by ACTION CLUTCH. (4) Damaged input Shaft causing HUB to strip (5) Failure to resurface the flywheel will invalidate Warranty.
Please Note: ACTION CLUTCH will not be liable for labor charges and other intangible or consequent losses that might be claimed as a result of the failure of any part, nor shall they be liable for damages or injury to any persons or property resulting from the misuses or improper installation of any part subject to this warranty.
Our limited warranties are void if a product is returned with removed, damaged or tampered labels or any alterations (including removal of any component or external cover).
ACTION CLUTCH will not provide any warranty coverage unless claims are made in compliance with all terms of the controlling warranty statement included with your product and you follow proper return procedure. To request warranty service, you will need to provide:
- The sales receipt or other evidence of the date and place of purchase.
- A description of the problem.
- Delivery of the product or the defective part, postage prepaid by buyer and carefully packed and insured, to: ACTION CLUTCH, 3912 WHITTIER BLVD, LOS ANGELES, CA 90023
When warranty service is completed, any repaired or replacement product or part will be returned to you postage prepaid.
ACTION CLUTCH SHALL NOT BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, ARISING OUT OF BREACH OF THIS WARRANTY OR ANY IMPLIED WARRANTY (INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY)
How Does State Law Apply? The laws of the State of CALIFORNIA, USA, govern our warranties. It gives you specific legal rights, and you may also have other rights that vary from state to state. Our warranties do not affect any additional rights consumers have under laws in their jurisdictions governing the sale of consumer goods. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the limitations or exclusions in our warranty statements may not apply. You may be required by law to give us a reasonable opportunity to correct or cure any failure to comply before you can bring any action in court against us under the Magnuson-Moss Warranty Act.
