Ir a contenido

Link G4X TS2JZX Plug-In ECU - 1993-1998 Toyota Supra (A80, 2JZ Non-VVTi)

The TS2JZX is Link's plug-in engine management for the A80 Supra, and the appeal is that it gives you a modern standalone ECU without the standalone install. It drops straight into the factory ECU location, uses the original mounts, and plugs into the car's existing loom and connectors. No rewiring, no adapter harness, no cutting into the factory wiring. It comes with a startup map so the car runs right away, and because everything stays in the stock location behind the trim, the install looks untouched. You get the full capability of Link's G4X platform on a 2JZ while keeping the car clean and simple.

What "Plug-In" Actually Means Here

A wire-in standalone means building or adapting a harness, terminating dozens of connections, and getting every pin right before the engine will even turn over. A plug-in skips all of that. The TS2JZX is built specifically for the Supra's factory connector and pinout, so it speaks to the car's existing wiring directly, retains the factory functionality the loom already supports, and is running in an afternoon rather than a weekend of wiring. When a plug-in is available for your car and the factory wiring is still in good shape, it's the easiest path to modern engine management, and this is that path for the 2JZ Supra.

G4X Standard Features

Every G4X plug-in shares the same processor, firmware, software, and standard feature set as the rest of Link's G4X range, so you aren't getting a stripped-down version to fit the plug-in format:

  • Dual CAN bus
  • E-Throttle control (requires a modification before usable on this ECU, see notes below)
  • Flex fuel
  • Trigger oscilloscope
  • 3-axis accelerometer
  • Selectable temp input pullups
  • Flexible engine protection limiters
  • CAN keypad control
  • VVT control
  • Open loop boost control
  • Closed loop boost control
  • Dual closed loop lambda
  • Direct automatic transmission control
  • Compatible with all leading aftermarket dashes via CAN or serial stream
  • 512MB of internal data logging

Motorsport and Advanced Tuning Features

The TS2JZX carries over the competition features from Link's championship-winning G4X platform, so there's real headroom for a built or track-driven 2JZ:

  • Nitrous control
  • Launch control
  • Anti-lag
  • Cruise control
  • Traction control
  • Race timer and power management
  • Gear shift control
  • Paddle shift control

Fitment and Important Notes

Read this part before you buy, because the fitment on the 2JZ is specific:

  • Engine: this ECU is for the A80 Supra with the 2JZ non-VVTi engine (1993-1997). It is not for the VVT-i 2JZ.
  • Check your connector: confirm your car's connector matches the header shown in the listing photo before purchasing. The plug-in only works with the matching factory header.
  • Transmission: it's designed for manual-transmission cars. If yours is an automatic, contact your Link ECU reseller first to discuss Direct Automatic Transmission Control compatibility before ordering.
  • E-Throttle: this ECU requires a modification before E-Throttle is usable, so factor that in if your setup relies on electronic throttle.
  • Most factory features are supported.

As with any plug-in, it assumes the car's factory wiring is in good condition. On a car whose loom has been hacked up by a previous owner, a plug-in can inherit those problems, so it's worth confirming your wiring is healthy before you count on a clean plug-and-play install.

Fitment:

1993-1998 Toyota Supra


Detailed Fitment:

  • Supra 1993-1998


Comparar productos

{"one"=>"Seleccione 2 o 3 artículos para comparar", "other"=>"{{ count }} de 3 artículos seleccionados"}

Seleccione el primer artículo para comparar

Seleccione el segundo artículo para comparar

Seleccione el tercer elemento para comparar

Comparar