DC Sports Billet Pitch Stop Mount - 2002-2022 Subaru WRX/STi/Impreza
Your factory Subaru pitch stop mount is made from weak plastic with soft rubber bushings that wear out fast. Once they're shot, your engine and transmission rock back and forth under acceleration and braking like crazy. The plastic also breaks under load if you're making more power than stock. The DC Sports billet pitch stop mount fixes both problems. It's machined from 6061 aluminum so it won't break, and it uses 75 durometer urethane bushings with stainless steel sleeves to lock down your drivetrain without making the car unbearable to drive.
Billet Aluminum Won't Break
The factory pitch stop mount is plastic. If you're running more boost or making more power than stock, that plastic will eventually crack or snap under the load. The DC Sports mount is CNC machined from billet 6061 aluminum, which is strong enough to handle whatever power you're making. You don't have to worry about it breaking when you launch the car or hammer the brakes hard.
75 Durometer Urethane Bushings
DC Sports uses 75 durometer urethane bushings instead of the soft factory rubber. The urethane is way stiffer than stock, so your engine and trans stay planted under acceleration and braking instead of rocking all over the place. The 75 durometer rating is firm enough to control drivetrain movement but not so stiff that you'll feel every vibration in the cabin. You get better traction and cleaner shifts without turning your car into a track-only rattlebox.
Stainless Steel Sleeves
The bushings have stainless steel sleeves inside them to handle the loads and resist wear. This keeps the bushings from tearing or deforming over time, which is what happens to the factory rubber bushings after a few years. The stainless sleeves also help distribute the load evenly so the mount lasts longer.
Anodized Finish with DC Sports Logo
Each mount is anodized for corrosion resistance and finished with a DC Sports logo. It looks clean under the hood and won't rust or corrode if you're driving in salt or wet conditions.
What You Get
DC Sports billet pitch stop mount
CNC machined from 6061 aluminum
75 durometer urethane bushings
Stainless steel sleeves
Anodized finish
DC Sports logo
Direct replacement for factory pitch stop mount
Fits Your Car
2002-2022 Subaru WRX
2004-2022 Subaru STi
2002-2022 Subaru Impreza (with matching chassis)
Note: This mount is stiffer than stock. You'll feel less drivetrain movement but slightly more vibration in the cabin. That's the trade-off for keeping your engine locked down.
Fitment:
2004-2021 Subaru STI 2.5L
2002-2022 Subaru WRX 2.0L
1993-2022 Subaru Imprezza 2.0L
2013-2022 Subaru Crosstrek 2.0L & 2.5L
2005-2009 Subaru Outback XT 2.5L
2020-2022 Subaru Outback 2.4 & 2.5L
2020-2022 Subaru Legacy 2.4 & 2.5L
2005-2009 Subaru Legacy 2.5L
Detailed Fitment:
WRX STi 2015-2021
WRX 2015-2021
Impreza 1996-2000
Impreza WRX 2002-2014
Technical details:
Billet 6061 Aluminum
75-Durometer Urethane Bushings
Included:
(1) Pitch Stop Mount
Install Guide:
1. Remove two (2) M8 bolts from evap lines (photo A)
2. Remove two (2) M6 bolts from stock air tube. (Photo B)
3. Remove two (2) M8 bolts securing the OEM intercooler. (photo C)
4. Remove two (2) m8 bolts securing OEM blow off valve to the intercooler. Be careful not to drop the gasket between the two.
(photo D)
5. Loosen clamps on both the throttle body coupler and the lower intake tube. (photo E)
6. Carefully remove intercooler from the engine bay.
7. Remove M6 bolt securing the ac line mounting bracket. Once removed carefully pull the AC line and bracket forward, DO
NOT bend the line. (photo F)
8. Loosen and remove two (2) m10 bolts for the OEM pitch mount. Remove pitch mount (PHOTO G)
9. Apply a small amount of provided grease to the outside of each bushing.
10. Install DC SPORTS pitch mount, reusing OEM hardware
11. Re install AC line
12. Re install Intercooler.
13. Re install OEM blow off valve, be sure that gasket is rei installed.
14. TIGHTEN ALL HARDWARE AND DOUBLE CHECK ALL WORK!!
