Hybrid Racing A2 Bolt-In Short Shifter - K Swap (84-00 Civic/CRX, 92-97 Del Sol, 90-01 Integra)
If you've ever done a K swap you know the shifter is one of the most annoying parts of the whole thing. You've got this beautiful swapped EF, EG, EK, or DC and then you're stuck figuring out what to do about the OEM RSX plastic shifter. The RSX-style setups mount on top of the tunnel and they force you to butcher your center console, so your clean interior ends up looking like a hack job. Hybrid Racing solved that back in 2008 when they built the very first bolt-in K-swap shifter, and this A2 is the latest version after nearly fifteen years and thousands of shifters out in the field. Here's what makes it different. It bolts in from underneath the tunnel, not on top. That means you keep your factory center console and your interior keeps that clean OEM look. No cutting up your console. Just two small holes to drill and you're done. It's the shifter that lets your K swap look factory inside while shifting way better than factory.
Here's Why The Bolt-In Design Matters
Most K-swap shifters are RSX-style units that sit on top of the shift tunnel. The problem with that is they stick up into where your center console lives, so you've got to hack the console apart to clear the shifter. Now your nice swapped car's got a chopped-up interior and it looks like exactly what it is, a swap that didn't get finished clean. Hybrid Racing's bolt-in shifter mounts from under the tunnel instead. Everything sits down where it should, so your factory center console drops right back in and your interior looks stock. You're getting all the shifting benefits without sacrificing the look of your car. For a lot of people that's the whole reason to go this route. You did the swap to make the car better, not to make the inside look like a project that stalled out.
Race-Tested All Over The World
This isn't some unproven part. Hybrid Racing's shifter's been run in cars from California to England to Japan, and racers all over the world reach for it. They're not picking it just because it's reliable, though it is. They're picking it because it installs easy and it's adjustable in ways most shifters aren't. When a part's been out there this long getting beat on by people who shift hard for a living, you know it holds up.
Dial In The Throw Exactly How You Want It
This is where the A2 really shines. You can adjust the front/back throw to three settings, full stock throw, 75% of stock, or 50% of stock. You can do the same thing with the left/right throw, three settings from full stock down to 50%. So you're tuning how short and notchy you want the shift action to feel. Want it tight and quick for the track? Crank it down to 50%. Want something closer to stock for daily comfort? Leave it at 100%. On top of that the shift knob adjusts up to 3 inches vertically and the aluminum offset block rotates a full 360 degrees, so you can put the knob exactly where your hand wants it. Not many shifters let you fine tune the feel and the position this much. You're setting it up around how you drive instead of just living with whatever the shifter gives you.
Works With Stock or Race Cables
The shifter works with both stock DC5 shifter cables and Hybrid Racing's own race cables, so you're not locked into one or the other. Run what you've got or step up to the race cables when you want. It accepts standard M10x1.5 shift knobs, which is the OEM Honda/Acura thread, so your existing knob or just about any aftermarket knob threads right on.
Check Your Chassis and Transmission
This shifter fits the 1984-1991 Honda CRX, 1984-2000 Honda Civic, 1992-1997 Honda Del Sol, and 1990-2001 Acura Integra. One thing to know. If your car came with an automatic from the factory you'll need to cut off the factory auto shifter cable bracket that's welded inside the shift tunnel. Once that's gone the install's identical to a manual chassis. On the transmission side it works with a long list of K-series gearboxes, including the 01-06 JDM Integra Type R, 01-05 JDM Civic Type R, 02-04 RSX Type-S, 02-06 UKDM/EDM Civic Type R, base RSX, 02-05 Civic Si, 05-06 RSX Type S, and the 03-06 CR-V AWD and 03-11 Element AWD K24 boxes. Verify your trans against the list before you order.
What You Get
- Hybrid Racing A2 Bolt-In K-Swap short shifter
- Fits 1984-1991 Honda CRX
- Fits 1984-2000 Honda Civic
- Fits 1992-1997 Honda Del Sol
- Fits 1990-2001 Acura Integra
- Bolts in from under the tunnel - retains factory center console
- Only requires drilling two small holes
- Front/back throw adjustable (100%/75%/50% of stock)
- Left/right throw adjustable (100%/75%/50% of stock)
- Shift knob adjusts up to 3 inches vertically
- Aluminum offset block rotates 360 degrees
- Works with stock DC5 cables or Hybrid Racing race cables
- Accepts M10x1.5 (OEM Honda/Acura) shift knobs
Compatible Transmissions
- 01-06 JDM Integra Type R K20A (Y2M3)
- 01-05 JDM Civic Type R K20A (NPR3)
- 02-04 RSX Type-S K20A2 (X2M5)
- 02-06 UKDM/EDM Civic Type R K20A (NPQ3)
- 02-06 Base RSX K20A3 (W2M5)
- 02-05 Honda Civic Si K20A3
- 05-06 RSX Type S K20Z1 (NSN4)
- 03-06 Honda CR-V AWD MT K24A1
- 03-11 Honda Element AWD MT K24A4 & A8
Note: Hybrid Racing A2 Bolt-In K-Swap short shifter for 1984-1991 Honda CRX, 1984-2000 Honda Civic, 1992-1997 Honda Del Sol, and 1990-2001 Acura Integra. Bolts in from under the shift tunnel (unlike top-mounted RSX-style shifters) to retain the factory center console and OEM interior look - only requires drilling two small holes. Front/back and left/right throw each adjustable to three settings (100%, 75%, 50% of stock throw). Shift knob adjusts up to 3 inches vertically; aluminum offset block rotates 360 degrees. Works with stock DC5 shifter cables or Hybrid Racing race cables. Accepts M10x1.5 OEM Honda/Acura shift knobs. Automatic-equipped chassis require cutting off the welded factory auto shifter cable bracket inside the tunnel before install. Compatible with K-series transmissions: 01-06 JDM ITR, 01-05 JDM CTR, 02-04 RSX Type-S, 02-06 UKDM/EDM CTR, base RSX, 02-05 Civic Si, 05-06 RSX Type S, 03-06 CR-V AWD MT, 03-11 Element AWD MT. Verify transmission compatibility before ordering. One shifter per order.
